Specials
Suspension
Recovery
Armor/Bumpers
Builds
CB's
Jeep Parts
PowerPlant HP
Winch

POWERPLANT HP SPECS/PART NUMBER
Winch Model: PowerPlant HP
Part Number: 71800 (12V)
Rated Line Pull: 9,500 lbs. (4310 kgs) single-line
Motor: Series-wound 4.6 hp 12V, with thermal protection shutoff switch
Electrical controls: Contactor
Remote Control: Remote switch with thermometric LED and 12' (3.7m) lead
Gear train: 3-stage planetary
Gear ratio: 156:1
Clutch (freespooling): Sliding ring gear
Brake: Automatic mechanical cone brake
Wire rope: 125' of 5/16" (38m of 8mm diam.)
Fairlead: Roller
Recommended battery: 650 CCA minimum
Battery leads: 2 gauge, 72" (1.83m)
Finish: High-gloss black powdercoat
Drum diameter/Length: 2.5"/9" (6.4cm/23cm)
Weight: 100 lbs (45 kgs)
Air Reservoir: 1/2 gallon tank with Integrated Air Intercooler
High Air Flow Rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi
Max Air Pressure: 100 psi
Air Pressure Switch: Yes
Air Hose: 12' nylon, with quick-disconnect. Brass air fittings and couplings
12V DC PERFORMANCE SPECS

Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 28.8 (8.78) 94 amps 1/9,500 (4,313)
2,000 16.4 (4.5) 165 amps 2/8,650 (4,927)
4,000 12.3 (3.75) 238 amps 3/7,920 (3,595)
6,000 9.5 (2.90) 307 amps 4/7,400 (3,359)
8,000 7.5 (2.29) 383 amps 5/6,940 (3,150)
9,500 6.2 (1.89) 451 amps