Specials
Suspension
Recovery
Armor/Bumpers
Builds
CB's
Jeep Parts

14-61-020
The RockBrawler™ Rear Bumper's high clearance, multi-faceted design provides the best possible departure angles and corner obstacle clearance. Its appearance is streamlined and sexy, not like the squarish, boxy shape of many other bumpers on the market. The RockBrawler™ is constructed of CNC laser cut, brake-formed 3/16" plate steel. The RockBrawler™ Rear Bumper can be mounted without cutting or altering the Jeep's frame rails.
The RockBrawler™ spare tire carrier is built from the highest quality components. The main structure of the tire carrier is fabricated from NC-bent DOM tubing and laser-cut, precision brake-formed plate steel. The extreme duty hinge assembly includes a CNC machined spindle and housing, with a pair of Timken tapered roller bearings for smooth operation under the heaviest loads. The latch is a high quality automotive grade mechanism, concealed in a fabricated housing. There is a spring-loaded pin-lock with stainless steel slider plate that locks the tire carrier into the open position to keep it from swinging around while accessing the Jeep's tailgate. The latch and pin lock are both easily disengaged with a simple pull of a knob. The tire mount is adjustable up and down, as well as in and out, to accomodate a wide variety of tire sizes up to 40". The adjustability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity. The included license plate mount places the license plate at the center of the spare tire.
IMPORTANT: Tire carrier will NOT fit with stock Jeep wheels, AEV wheels, or any wheel with a center hole of smaller than 2" and/or more than 4-1/2" of backspacing. Tire carrier does fit with most aftermarket wheels, please measure yours for compatibility before ordering.
$1175.00

 


14-61-010
The RockBrawler™ rear bumper is designed to combine hard core off-road performance with full features. This bumper is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design. The RockBrawler™ rear bumper is equipped with a built-in high clearance hitch receiver.
The RockBrawler™ rear bumper has a built-in step/recess to provide access to the rear of the Jeep as well as clearance for the spare tire.
$449.00

 


11-16-020-B
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design. The Comp Stinger™ extends 17.6" forward from the front edge of the bumper, and 21.9" high from the top surface of the bumper.
$395.00

 


11-16-020-S
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design. The BFH Trail Stinger™ is similar in proportion to the famous Poison Spyder Trail Stinger™. This time-honored design has proven itself on hundreds of Jeeps over the past decade, providing simple, clean lines along with a measure of forward-flop protection. The Trail Stinger™ extends 13.4" forward from the front edge of the bumper, and 17" high from the top surface of the bumper.
$375.00

 


11-16-020-B
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design.
The optional Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper.
$375.00

 


14-17-020
The Poison Spyder Customs BFH™ rear bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance and departure angle possible. It is no wider than the Jeep's rear body tub, with angled facets to improve its ability to slide over the rocks. The BFH is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
$289.00

 


11-16-020
Poison Spyder Customs BFH™ front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeep's frame rails, with angled facets to improve its ability to slide over the rocks. The BFH™ bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH™ bumper features an integrated winch mount and one-piece design.
$269.00

 


11-12-010
Poison Spyder Customs Front Stingers are the original hard core rock crawling Jeep bumper. The stinger is a sturdy and functional bumper built for today's extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. The Poison Spyder Stinger is simple, lightweight, functional and very affordable. This part number is for the "Comp" Stinger. The Comp Stinger™ is built on a base plate laser cut from 3/16" plate steel, with a Stinger hoop made of CNC-bent 1-3/4" X .120 wall DOM structural tubing. The Comp Stinger™'s main hoop stands 36" from its base at a 45° angle. Poison Spyder Stingers are designed to bolt directly onto your Jeep's frame using OE mounting hardware. Comp Stinger™s may be reinforced with horizontal support tubes as shown in the "action" photos above, however these are not included in the kit. Stingers are shipped bare steel.
$229.00

 


11-11-010
Poison Spyder Customs Front Stingers are the original hard core rock crawling Jeep bumper. The stinger is a sturdy and functional bumper built for today's extreme trails. Stingers assist in minimizing damage during a rollover by helping to protect hood line, radiator, and engine. Additionally preventing potential end-overs when heading down steep terrain. The Stinger also protects the grill and winch with no loss in approach angle typical of bulky square bumpers. The Poison Spyder Stinger is simple, lightweight, functional and very affordable. This part number is for the Trail Stinger™. The Trail Stinger™ is built on a base plate laser cut from 3/16" plate steel, with a Stinger hoop made of CNC-bent 1-3/4" X .120 wall DOM structural tubing. The Trail Stinger™'s main hoop stands 27" from its base at a 47° angle. Poison Spyder Stingers are designed to bolt directly onto your Jeep's frame using OE mounting hardware. Comp Stinger™s may be reinforced with horizontal support tubes as shown in the "action" photos above, however these are not included in the kit. Stingers are shipped bare steel.
$209.00