Specials
Suspension
Recovery
Armor/Bumpers
Builds
CB's
Jeep Parts

13-02-070
Aluminum
Poison Spyder Crusher Corners™ are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners™ are a key component in avoiding body damage to your Jeep. These Crusher Corners™ are CNC laser cut from 6061-T6 aluminum. The precisely cut pattern is then carefully formed for a perfect fit to your Jeep's body lines. Crusher Corners™ protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor At the front edge, Crusher Corners™ are precisely cut to integrate with Poison Spyder Rocker Knockers™ or Ricochet Rockers™. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks.
For the ultimate in corner protection and hard core looks, these Crusher Corners™ feature our 3" Weld-On DeFender™ Flares. DeFender™ Flares are designed to match Poison Spyder's front DeFenders™. Fabricated entirely of 3/16" 6061-T6 aluminum plate, DeFender™ Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender™ Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. The 3" DeFender™ Flares match the factory flare tire coverage to help you stay legal in those areas where flares are required by law.
Note that aluminum is recommended when weight is valued more than indestructibility. Choose these light-weight aluminum Crusher Corners with DeFender Flares if your Jeep is only used occasionally on the tougher trails, and if on those occasions you are a skilled, patient driver. At 3/16" thick, these aluminum components are fairly tough, but they simply will not withstand the same amount of abuse that our steel ones will.
$790.00

 


13-04-023
Poison Spyder Crusher Corners™ are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners™ are a key component in avoiding body damage to your Jeep. Crusher Corners™ are CNC laser cut from high strength 3/16" plate steel. The precisely cut pattern isthen carefully roll-formed for a perfect fit to your Jeep's body lines. Crusher Corners™ protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor At the front edge, Crusher Corners™ are precisely cut to integrate with Poison Spyder Rocker Knockers™ or Ricochet Rockers™. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks.
For the ultimate in corner protection and hard core looks, these Crusher Corners™ feature our 3" Weld-On DeFender™ Flares. DeFender™ Flares are designed to match Poison Spyder's front DeFenders™. Fabricated entirely of 3/16" plate steel, DeFender™ Flares are a tubeless design, meaning they aren't constructed with the thinner wall (.120") tubing outer rail, as traditional tube fenders and flares are built. DeFender™ Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. The 3" DeFender™ Flares match the factory flare tire coverage to help you stay legal in those areas where flares are required by law.
$605.00

 


13-04-043
Comp Cut™ Crusher Corners™ feature a competition-style wheel opening that allows clearance for the largest tires and articulation. The wheel well is open toward the rear to allow for wheelbase stretches and to provide maximum clearance for hardcore wheeling. Comp Cut™ Crusher Corners™ have provisions for flush-mounted LED taillights. They also provide a significant weight savings compared to our standard Crusher Corners. YJ Comp Cut™ Crusher Corners are compatible with our YJ/CJ-7 Rocker Knockers or Ricochet Rockers with TJ Wheel Opening. They are NOT compatible with our "Stock" YJ Rocker Knockers or Ricochet Rockers.
For the ultimate in corner protection and hard core looks, these Crusher Corners™ feature our Standard Width Weld-On Crusher Flares™. Crusher Flares™ are fabricated from 1.5" x .120 wall DOM tubing with a precision-formed 1/8" plate steel fender. Standard Width Crusher Flares™ extend approximately 3" outboard to provide extra body protection and a surface to slide along rocks and trees on tight trails. The Standard Width Crusher Flares™ match the factory flare tire coverage to help you stay legal in those areas where flares are required by law.
$585.00

 


13-04-040
Aluminum
Comp Cut™ Crusher Corners™ feature a competition-style wheel opening that allows clearance for the largest tires and articulation. The wheel well is open toward the rear to allow for wheelbase stretches and to provide maximum clearance for hardcore wheeling. Comp Cut™ Crusher Corners™ have provisions for flush-mounted LED taillights. They also provide a significant weight savings compared to our standard Crusher Corners. YJ Comp Cut™ Crusher Corners are compatible with our YJ/CJ-7 Rocker Knockers or Ricochet Rockers with TJ Wheel Opening. They are NOT compatible with our "Stock" YJ Rocker Knockers or Ricochet Rockers.
The aluminum Crusher Corners™ provide moderate protection from side and corner impacts to your Jeep, but they will save you up to 50 pounds in weight. Steel Crusher Corners™ MUST be painted or powder coated to prevent rust. Aluminum Crusher Corners™ may be painted, powdercoated, polished or left as raw aluminum with no risk of corrosion other than light surface oxidation over time. Only steel Crusher Corners™ are available with Weld-On Crusher Flares™.
$405.00

 


13-04-010
Aluminum
Poison Spyder Crusher Corners™ are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners™ are a key component in avoiding body damage to your Jeep. Poison Spyder Crusher Corners are CNC laser cut from high strength 3/16" plate steel or rugged lightweight 3/16' 6061-T6 aluminum. The precisely cut pattern isthen carefully roll-formed for a perfect fit to your Jeep's body lines. Crusher Corners™ protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor At the front edge, Crusher Corners™ are precisely cut to integrate with Poison Spyder Rocker Knockers™ or Ricochet Rockers™. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks. These Crusher Corners™ feature a smooth side with maximum trail clearance, but Crusher Corners™ with integrated Crusher Flares™ are also available.
$375.00

 


14-05-070
Aluminum
DeFender™ Flares are designed to match Poison Spyder's front DeFenders™. These weld-on DeFender™ Flares may be added to your existing Poison Spyder Crusher Corners or competitors' full corner armor. Fabricated entirely of 3/16" plate aluminum for strength and light weight. DeFender™ Flares feature a sturdy outer edge formed of 3/16" plate, with a full under-side return for strength. Note that aluminum DeFender™ Flares may only be welded to aluminum Crusher Corners (or competitors' aluminum full corner armor).
$359.00

 


13-04-040
Comp Cut™ Crusher Corners™ feature a competition-style wheel opening that allows clearance for the largest tires and articulation. The wheel well is open toward the rear to allow for wheelbase stretches and to provide maximum clearance for hardcore wheeling. Comp Cut™ Crusher Corners™ have provisions for flush-mounted LED taillights. They also provide a significant weight savings compared to our standard Crusher Corners. YJ Comp Cut™ Crusher Corners are compatible with our YJ/CJ-7 Rocker Knockers or Ricochet Rockers with TJ Wheel Opening. They are NOT compatible with our "Stock" YJ Rocker Knockers or Ricochet Rockers.
For the ultimate in hardcore strength and longevity, nothing can match cold hard steel when it comes to body armor for your Jeep. Steel withstands impacts better without taking on damage or transferring damage to the body underneath, and it also has a smoother, harder surface that will slide over the rocks without gouging easily.
$319.00

 


13-04-010
Poison Spyder Crusher Corners™ are built for the off-road enthusiast who likes to play in the BIG rocks! Crusher Corners™ are a key component in avoiding body damage to your Jeep. Poison Spyder Crusher Corners are CNC laser cut from high strength 3/16" plate steel. The precisely cut pattern isthen carefully roll-formed for a perfect fit to your Jeep's body lines. Crusher Corners™ protect your Jeep from the tailgate all the way to the door opening, in one unbroken curtain of impregnable body armor At the front edge, Crusher Corners™ are precisely cut to integrate with Poison Spyder Rocker Knockers™ or Ricochet Rockers™. All of the bolt holes are countersunk, and the supplied stainless steel flat head cap screws yield a smooth, flat surface to slide over rocks. These Crusher Corners™ feature a smooth side with maximum trail clearance, but Crusher Corners™ with integrated Crusher Flares™ are also available.
$319.00